3 Easy Way To Apply Patches

 

How to Apply Patches

"Once you have determined what kind of patch will work best in your favour, you will then attach it to your fabric. Each of the methods has their advantages and disadvantages, and your decision may depend on the material of your patch, the material that makes up the fabric you are using, and how long you would want the patch to last."

3 Easy way to Apply Patches

Before discussing the techniques of application, let's look at the types of patches. Each type has its own specific use, specific application method, and requirements. We also use custom patches

1. Iron-On Patches

The most common type is an iron-on patch that has a heat-activated adhesive backing, thus allowing its use upon placing it on using a household iron. However, they are great for ornamentation. You can be able to add your personality to it. However, they are not very great for heavy-use fabrics; the adhesive may deteriorate over time.

2. Sew-On Patches

Sew-on patches: These you will sew onto your fabric, either by hand or with a sewing machine. The sew-on patch provides the tightest, most permanent attachment and is best suited for heavy-duty applications, like backpacks, work uniforms, or parts of the body that are subjected to heavy use.

3. Velcro Patches

Velcro patches are preferably used for uniforms or any other situations where a patch needs to be put on and taken off frequently, removed, and replaced often. The Velcro shall remain as the hook side, and the loop side is either sewn or adhered to the fabric. This type of patch is especially popular in military or tactical gear.

1:Applying Iron-On Patches

Iron-on patches are perfect for new patchers as, with a minimum amount of application practice, they are quite simple to adhere.

1. Prepare the Area:

Choose the location where you want your patch. Ensure that your fabric is clean and free from any moisture or dirt, as these may interfere with the adhesive bonding. You should iron the section before this as well to iron out the wrinkles.

2. Position the patch:

Put the patch, adhesive side down, on the fabric. Make sure that it is aligned properly now, because you are only going to get one chance in this process—that's when it actually gets attached.

3. Cover with a cloth:

To protect your patch from the direct heat and the fabric from being marred by stains, cover it with a thin cloth. You might use a cotton pillowcase or even a dish towel to do this.

4. Iron It On:

Place the cloth over the patch and place it against the iron, which you will have set to a medium or high heat setting but with no steam. Hold the iron there for 15-30 ssecondswithout moving it. Now, open it up and check if the edge of the patch is sticking well onto the fabric. If it's not sticking that well, apply some more pressure with the iron for a few more seconds.

5. Let It Cool:

Let the patch cool a little while after applying the heat. That does ensure the adhesive is properly stuck onto the fabric.

2:Apply Sew-On Patches

Sewing patches to fabric provide ultimate bonding. More time-consuming and technical than iron-on patches, the end result will be much more resistant to wear and tear with fabrics that will constantly be used. We also apply this step for apply patch on leather jacket

1. Position the patch:

Position the patch where you want it on the fabric and pin it down using pins or even a dab of fabric glue so that it does not shift during sewing.

2. Thread the needle:

You use matching-colour thread for the edge of the patch or the fabric to be sewn so that the seam goes almost perfectly unnoticeable. It is okay to use a hand needle, but you can also use a sewing machine if the size allows.

3. Sew Around the Edge:

For hand sewing, use a whip stitch or running stitch, sewing close to the patch's edge as possible. A sewing machine will give a quicker and neater finish, but the precision offered by hand stitching is unmatchable.

4. Secure the thread:

Once you have sewn all the way around the patch, tie off the thread inside the fabric so it does not unravel.

3:Apply velcro Patches

Velcro patches are pretty easy to put on, but do require a bit more work if the fabric isn't already covered with the Velcro loop side.

1. Attach the Velcro backing:

If your fabric isn't already covered with a backing of Velcro, attach the soft loop side of the Velcro to the fabric with stitches or adhesive.

2. Apply the patch:

Simply attach the hook side of the patch to the Velcro base. The patch can be removed or changed at will.

FAQs

1. How long do iron-on patches last?

Iron-on patches will last for many years if applied correctly and cared for; however, the breakage of the adhesive after repeated washing may force you to reinforce the patch with stitches if the edges start lifting or after several washes.

2. Can I take off an iron-on patch after applying?"

This is true, except that sometimes the residue or damage stays on the fabric. Use the heat of the iron or adhesives remover to loosen the patch, so you'll be left with some adhesive marks from your work.

3. What kind of fabric is best for patching?

Patches will work best on thick materials such as denim, canvas, cotton, and even polyester. Any of the other varieties that are as fragile as silk or wool would be ravaged by the heat required to apply iron-on patches or the stitching used to apply sewing-on patches.

4. How can I prevent my patch edges from peeling?

In the case of iron-on patches, enough temperature and pressure are needed so that the glue would bind the fabric in the right manner. If the edges of the patches begin to peel off, the reinforcement can easily be done with a few stitches or even fabric glue.

5. Can I put patches on stretchy fabrics like leggings?

Yes, but you need to be aware that stretch fabrics tend to pill or flake away after time due to the patch. They work much better as a sew-on patch. But if it has to go on a stretch area of the garment, it should be applied in an area that won't put too much stress on the outside area.